Manufacturers

More Information

Sponsors

Hand Tools & Equipment Distributor in Malaysia

KENNEDY

KEN-539-3590K
"G" CLAMP ADAPTOR

"G" CLAMP ADAPTOR

KEN5393590K G-Clamp Adaptor For use with all conventional G-Clamps. Acts as a 'third arm' allowing many clamping set-ups not normally possible...
RM93.20
Add:
KEN-558-8610K
0-100mm LOCKING C-CLAMP

0-100mm LOCKING C-CLAMP

ITEM DISCONTINUED KENNEDY KEN5588610K Wide and deep jaw profile, clears obstacles to firmly clamp sections that a normal grip wrench cannot.
RM219.60
... more info
Sold Out
KEN-558-8480K
0-100mm SELF-LEVELLING GRIP WRENCH

0-100mm SELF-LEVELLING GRIP WRENCH

KEN5588480K. Self Levelling Grip Wrenches The two knurled swivel pads ensure fully flat contact with the workpiece at the clamping point. Suitable...
RM205.10
Add:
KEN-558-8740K
0-100mm SPINDLE CLAMP

0-100mm SPINDLE CLAMP

KEN5588740K. Spindle Clamps Fine spindle clamping adjustment enables accurate clamping. Swivel joint clamping points allow tapered surfaces to be...
RM367.50
Add:
KEN-558-8160K
0-100mm TABLE C-CLAMP

0-100mm TABLE C-CLAMP

KEN5588160K Table C Clamp Five holes in base to allow fixture to work surface as a permanent clamp. Swivel foot to clamp tapered workpieces. Quick...
RM319.90
Add:
KEN-558-8420K
0-100mm W-TYPE FLAT/CONVEX JAWS GRIP WRENCH

0-100mm W-TYPE FLAT/CONVEX JAWS GRIP WRENCH

KEN5588420K. Flat & Convex Grip Wrench The convex jaw shape allows clearance around small obstacles and the broad jaw profile ensures that flat...
RM235.30
Add:
KEN-558-8670K
0-125mm LOCKING C-CLAMP WITH SWIVEL TIPS

0-125mm LOCKING C-CLAMP WITH SWIVEL TIPS

KEN5588670K Locking C Clamps - Swivel Pads Wide and deep jaw profile, clears obstacles to firmly clamp sections that a normal grip wrench cannot....
RM312.00
Add:
KEN-558-8340K
0-15mm AXIAL J-TYPE GRIPWRENCH

0-15mm AXIAL J-TYPE GRIPWRENCH

KEN5588340K. Axial Grip Wrenches For auto body repair and steel fabrication. Chrome steel body with narrow profile jaws for confined areas. Straight...
RM274.00
Add:
KEN-558-8330K
0-15mm AXIAL T-TYPE GRIPWRENCH

0-15mm AXIAL T-TYPE GRIPWRENCH

KEN5588330K Axial Grip Wrenches For auto body repair and steel fabrication. Chrome steel body with narrow profile jaws for confined areas. Straight...
RM235.20
Add:
KEN-558-8680K
0-240mm LOCKING C-CLAMP WITH SWIVEL TIPS

0-240mm LOCKING C-CLAMP WITH SWIVEL TIPS

KEN5588680K Locking C Clamps - Swivel Pads Wide and deep jaw profile, clears obstacles to firmly clamp sections that a normal grip wrench cannot....
RM323.00
Add:

Featured Products

WELDING HAND GLOVE FULLY LEATHER 12"
WELDING HAND GLOVE FULLY LEATHER 12"
RM13.00  RM3.90
Save: 70% off
Makita Petrol Chain Saw 30"(760mm), 90cc, DCS9010-76
Makita Petrol Chain Saw 30"(760mm), 90cc, DCS9010-76
RM5,550.00  RM3,850.00
Save: 31% off
3 Tray Pegboard Cart with castor
3 Tray Pegboard Cart with castor
RM360.00  RM205.00
Save: 43% off
MR.MARK MK-TOL-4631 31-PCE SOCKET WRENCHES SET
MR.MARK MK-TOL-4631 31-PCE SOCKET WRENCHES SET
RM360.00  RM240.00
Save: 33% off

Monthly Specials For January

LIDA AIR COMPRESSOR 1.5KW 2HP x 90L YL90S-2
LIDA AIR COMPRESSOR 1.5KW 2HP x 90L YL90S-2
RM1,650.00  RM1,250.00
Save: 24% off
4 IN 1 BALL JOINT SERVICE TOOLS SET - AN010145
4 IN 1 BALL JOINT SERVICE TOOLS SET - AN010145
RM880.00  RM599.00
Save: 32% off
Makita Electric Chain Saw 16", 1800W, 4kg UC4020A
Makita Electric Chain Saw 16", 1800W, 4kg UC4020A
RM605.00  RM545.00
Save: 10% off
3 Ton Low Profile Hydraulic Floor Jack
3 Ton Low Profile Hydraulic Floor Jack
RM550.00  RM460.00
Save: 16% off
3010 WORKBENCH W. BACKPANEL - Other Industrial
3010 WORKBENCH W. BACKPANEL - Other Industrial
RM2,440.00  RM2,200.00
Save: 10% off
Your IP Address is: 18.212.92.235
Copyright © 2019 Techno Tools*** About Us***mobile link***Desktop link